Two-part. Zero VOC. Four shop-tested colors.
Two-component, 100% solids structural epoxy formulated as a base coat or standalone build for garages, basements, warehouses, and showrooms. Walk-on at 12 hours, return-to-service at 36. Meets ASTM C-579 compressive strength at 4500 PSI. Pair with RS Poly polyaspartic topcoat for the full system.
Diamond grind to CSP 3-4. Vacuum thoroughly. Moisture test — under 4 lbs MVT. If higher, prime with MVB Primer first.
2:1 by volume, A into B. Power mix 3 minutes at 400-600 RPM. Scrape sides. Do not whip air.
Pour ribbon. Spread with 1/8" notched squeegee. Backroll with 3/8" lint-free roller. Move within 45 minutes.
Walk-on at 12h. Sand and topcoat with RS Poly polyaspartic at 24–48h window for chemical bond.
Application guides, prep checklists, and gotcha notes from the field — paired with this product so you know what you're getting into before the kit ships.
A two-car garage from bare concrete to glossy polyaspartic in three days. Tools, costs, every step in order, and the common mistakes that wreck DIY floors. Written for Texas heat and Texas slabs.
Floor coatings fail at the prep step roughly four times out of five. The universal checklist that works for any 100% solids epoxy or polyaspartic system. Written by a Texas distributor who has watched every kind of failure walk back through the door.
CSP profiles, slab age, contamination history, and what your topcoat thickness is asking for. With our internal cheat sheet for the four most common spec calls.
The coverage number on the data sheet is theoretical. Here's how to translate it into the right kit count for a real garage, basement, or commercial floor — with a worked example.
